IPM pneumatic punch, the mold should be safe operation

IPM pneumatic punch, the mold should be safe operation First, the work before the pneumatic punch press the power button to open the first off, not a sudden start, stop 5 minutes check the content: 1), check the punch health iron Marking Machines, table clean no debris. Hydraulic press, pneumatic presses, hydraulic presses, C-hydraulic machine 2), check the machine lubrication system, mechanical system is normal shearing machine. Hydraulic press, pneumatic presses, hydraulic presses, C-hydraulic machine 3), check the clutch, the brake is flexible and easy to use, foot pedals, rods, pressure plate, screws and the operation of the device without loosening.

Hydraulic press, pneumatic presses, hydraulic presses, C-hydraulic machine 4), check whether the mold head fracture, die is bang bite, limit column is loose. Hydraulic press, pneumatic presses, hydraulic presses, C-hydraulic machine 5), clean mold chest. Hydraulic press, pneumatic presses, hydraulic presses, C-hydraulic machine 6), check whether the stamping die and the pressure plate is installed firmly marking machine, punch whether the batter situation. Hydraulic press, pneumatic presses, hydraulic presses, C-hydraulic machine 7), check the electrical grounding line intact, tubing smooth without clogging, no rupture. Hydraulic press, pneumatic presses, hydraulic presses, C-hydraulic machine

You can leave a response, or trackback from your own site.

Leave a Reply